If you’re dead serious about Batman, err the Dark Knight then you’ll like this. Putting the batman spotlight on youself with your very own lamp right next to your PC with this easy to create USB gadget. You don’t necessarily need to have a gigawatt three phase power supply, all you have is a measly little 5V USB, though you won’t be able to summon the help of the Caped Crusader, you will be able to summon a few jealous friends!
So here is what you will need:
- A couple of old packaging bottle caps (shower bottle and single serving drinks bottle, or something similar)
- Some thick tin foil (take out tray, or aluminum roofing / flashing tape) although thin foil will work
- A cheap USB Laptop light (or the appropriate LED, wire, correct resistor and USB Plug
- A small piece of clear plastic sheet (OHP sheet or bit of old packaging)
- Some cardboard and or foamcore (not necessary but nice)
- Some low value loose change
- Soldering iron
- Hot Melt Glue gun
- Black and silver paint (spray or markers)

May I warn you though, you might need a good one to two hours to complete this project! Click on the link below if you’re prepared!
[via Instructables]








[...] you didn’t want to bother with our DIY USB batman spotlight but still wanted something that offered a similar effect, here’s the latest and soon to come [...]